|AQUARIUM LED OPERATING MANUAL||(3.85 MB)|
|AQUARIUM 40 LED BIO||(3.99 MB)|
|AQUARIUM 50 LED BIO||(4.35 MB)|
|AQUARIUM 60 LED BIO||(2.72 MB)|
|AQUARIUM 80 LED BIO||(2.95 MB)|
Read carefully the instructions provided with your aquarium before the installation (manual and warnings) in order to perform every step correctly. Please certify that your aquarium is in good condition and without any damage.
If your aquarium has a Biobox filter, follow its instruction, and don’t forget to remove the protective films of the filter media (EasyBox Activated Carbon and EasyBox Aquaclay).
Place the aquarium on the cabinet/support and verify if it is stable and leveled. Fill it with water in order to ensure its tightness. After this verification, empty it and start the decoration. When filling the tank with water, we recommend you the utilization of a container to avoid affecting the decoration. Switch on the equipment of your tank (heater, pumps, lighting system, etc.) and let it stabilize. Get advised in the store you bought the fish and plants what are the recommended conditions for the species you choose. For more information see the documentation available on our website.
We recommend you the utilization of a Carpet Shock from Tecatlantis. The main function is to distribute the weight evenly throughout the area of the aquarium surface. It also absorbs any irregularity that is present at the surface of contact between the aquarium background and the top of the cabinet, as well as helping to isolate the aquarium, thermally.
The utilization of other material none recommended can cause the break of the tank voiding the warranty.
No. Once installed, the aquarium can’t be moved or shifted to another place, since such an operation would damage its stability and security. To replace the aquarium, you must empty it in full (including decoration).
Esteja atento à sua caixa de email.