Support
Instructions Manual
DESIGN GLOBE_INSTRUCTIONS LED
AQUATABLE
INSTRUCTIONS AQUAVIEW
EASY LED 3 LIGHT_OPERATING MANUAL
BIOBOX and MINI BIOBOX OPERATING MANUAL
BIOBOX and MINI BIOBOX OPERATING MANUAL
CERAMIC HEAT EMITTER OPERATING MANUAL
CERAMIC SOCKET OPERATING MANUAL
DOME LAMP OPERATING MANUAL
DUAL DOME OPERATING MANUAL
EASY LED CONTROL 1 plus OPERATING MANUAL
EASY LED CONTROL 2 plus OPERATING MANUAL
EASY LED TUBE OPERATING MANUAL
EASY LED UNIVERSAL 2.0 OPERATING MANUAL
EASY LED UNIVERSAL OPERATING MANUAL
EASYFLUX OPERATING MANUAL
ELECTRIC SPRAYER OPERATING MANUAL
FLUORESCENT LAMPS OPERATING MANUAL
HEATING CABLE OPERATING MANUAL
HEATING MATS OPERATING MANUAL
INCUBATOR OPERATING MANUAL
LAMP HOLDER OPERATING MANUAL
LED OPERATING MANUAL
LUMINUS OPERATING MANUAL
REPTI FOGGERS OPERATING MANUAL
SUPER SUN OPERATING MANUAL
TC-200 OPERATING MANUAL
TC-500 OPERATING MANUAL
THERMO-HYGROSTAT OPERATING MANUAL
THERMOSTAT OPERATING MANUAL
WIRE BASKET OPERATING MANUAL
EASYKLIM+ OPERATING MANUAL
AQUARIUM LED OPERATING MANUAL
Data Sheet
NANO CUBIC 20
AQUA FRAME
BETTALUX
BETTACUB
DESIGN GLOBE
NANO FASHION VISION 1
NANO MARIN 40
AQUAVIEW 50 FW
AQUAVIEW 50 SW
AQUAVIEW 65 FW
AQUAVIEW 65 SW
AQUAVIEW 92 FW
AQUAVIEW 92 SW
AQUAVIEW 120 FW
AQUAVIEW 120 SW
AQUAVIEW 150 FW
AQUAVIEW 150 SW
FUSION 60_LED 2.0
FUSION 60_H2O 2.0
TERRARIUM 23x23x30
TORTUM 40
BIOBOX 0
EASYBOX FIBER
EASYBOX COARSE FOAM
EASYBOX CARBON FOAM
EASYBOX FINE FOAM
EASYBOX AQUACLAY
EASYBOX ZEOLITE
EASYBOX ACTIVATED CARBON
EASYBOX GLASS RINGS
EASYBOX VOLCANIC RINGS
EASYBOX CLEANWATER
NANO CUBIC 30
NANO CUBIC 40
AQUATRESOR
NEW KIDSAFE C40
NEW KIDSAFE H40
BIOFUN
FUNNY FISH 30
FUNNY FISH 35
FUNNY FISH 40
FUNNY FISH 50
KIT 30
KIT 35
KIT 40
KIT 50
AQUADREAM 60
AQUADREAM 80
AQUADREAM 100
AQUARIUM 40 LED BIO
AQUARIUM 50 LED BIO
AQUARIUM 60 LED BIO
AQUARIUM 80 LED BIO
NANO FASHION VISION 2
NANO FASHION VISION L
NANO FASHION VISION H
AQUAFASHION
AQUATABLE 100x63
AQUATABLE 100x100
AQUATABLE 130x75
ELEGANCE EXPERT 2.0 60
ELEGANCE EXPERT 60_H2O 2.0
ELEGANCE EXPERT 2.0 80
ELEGANCE EXPERT 80_H2O 2.0
ELEGANCE EXPERT 2.0 100
ELEGANCE EXPERT 100_H2O 2.0
ELEGANCE EXPERT 2.0 120
ELEGANCE EXPERT 120_H2O 2.0
FUSION 70_LED 2.0
FUSION 70_H2O 2.0
FUSION 80_LED 2.0
FUSION 80_H2O 2.0
FUSION 100_LED 2.0
FUSION 100_H2O 2.0
FUSION 120x40_LED 2.0
FUSION 120x40_H2O 2.0
FUSION 120x50_LED 2.0
FUSION 120x50_H2O 2.0
FUSION 120x60_LED 2.0
FUSION 120x60_H2O 2.0
FUSION 150x50_LED 2.0
FUSION 150x50_H2O 2.0
FUSION 150x60_LED 2.0
FUSION 150x60_H2O 2.0
FUSION 200x60_LED 2.0
FUSION 200x60_H2O 2.0
FUSION 200x70_LED 2.0
FUSION 200x70_H2O 2.0
FUSION H120_LED 2.0
FUSION H120_H2O 2.0
FUSION H150_LED 2.0
FUSION H150_H2O 2.0
FUSION H200_LED 2.0
FUSION H200_H2O 2.0
FUSION C100_LED 2.0
FUSION C100_H2O 2.0
TORTUM 55
TORTUM 75
TORTUM 100
TORTUM TERRA 75
TORTUM TERRA 100
TORTUM TERRA 120
START 55
STYLE LED PLUS 80 2.0
STYLE LED 100_LED 2.0
STYLE LED 120_LED 2.0
STYLE LED 150_LED 2.0
TERRARIUM 30x30x30
TERRARIUM 30x30x45
TERRARIUM 45x45x45
TERRARIUM 60x45x45
TERRARIUM 88x45x45
TERRARIUM 118x45x45
TERRARIUM 39x35x60
TERRARIUM 45x45x60
TERRARIUM 68x38x60
TERRARIUM 88x45x60
TERRARIUM 88x45x75
TERRARIUM 118x45x60
TERRARIUM 118x45x75
TERRARIUM 132x45x60
TERRARIUM 132x45x75
SMART LINE 23x23x30
SMART LINE 30x30x30
SMART LINE 30x30x45
SMART LINE 45x45x45
SMART LINE 60x45x45
SMART LINE 88x45x45
SMART LINE 39x35x60
SMART LINE 60x45x60
158. SMART LINE 60x45x60
SMART LINE 88x45x60
BIOBOX 1
BIOBOX 2
BIOBOX 3
MINI BIOBOX 1
MINI BIOBOX 2
MY BETTA
EXPLORER MADRID
EXPLORER LONDON
EXPLORER LISBON
EXPLORER ATHENS
EXPLORER ROME
EXPLORER VIENNA
EXPLORER PARIS
EXPLORER AMSTERDAM
SMART LINE 88x45x90
STYLE LED PLUS 100 2.0
STYLE LED PLUS 120 2.0
SUBSTRATE
AQUAGLOW
EASY LED UNIVERSAL FW
EASY LED UNIVERSAL SW
EASY LED UNIVERSAL MB
EASY LED UNIVERSAL DB
EASYFLUX
EASY LED TUBE
EASY LED universal model
CLEANSYS
CLEANBOX
CLEANBOX PRO
SAFE LIGHTING LED
EASY LED CONTROL 1plus
EASY LED CONTROL 2plus
LUMINUS
ACCESSORIES
AQUA DECOR
TERRA DECOR
BEAM SPOT LAMPS
EQUIPMENTS_FITTING SUPPORTS
EQUIPMENTS_MONITORING DEVICES
SUPERIOR HEAT MATS
TERRARIUM ACCESSORIES
EASY LED TORTUM universal model
EASY LED TORTUM universal
TERRATABLE
EASY LED UNIVERSAL 2.0 DB
EASY LED UNIVERSAL 2.0 FW
EASY LED UNIVERSAL 2.0 MB
EASY LED UNIVERSAL 2.0 SW
CERAMIC INFRARED
DESERT FLUORESCENT LAMPS
MOONLIGHT
NATURAL FLUORESCENT LAMPS
NEODYMIUM
SUPER SUN UV
TROPICAL FLUORESCENT LAMPS
INFRARED HEAT
HEATING CABLE
TC-200
TC-500
CLEANSYS PRO
EASYKLIM+

Read carefully the instructions provided with your aquarium before the installation (manual and warnings) in order to perform every step correctly. Please certify that your aquarium is in good condition and without any damage.

If your aquarium has a Biobox filter, follow its instruction, and don’t forget to remove the protective films of the filter media (EasyBox Activated Carbon and EasyBox Aquaclay).

Place the aquarium on the cabinet/support and verify if it is stable and leveled. Fill it with water in order to ensure its tightness. After this verification, empty it and start the decoration. When filling the tank with water, we recommend you the utilization of a container to avoid affecting the decoration. Switch on the equipment of your tank (heater, pumps, lighting system, etc.) and let it stabilize. Get advised in the store you bought the fish and plants what are the recommended conditions for the species you choose. For more information see the documentation available on our website.


We recommend you the utilization of a Carpet Shock from Tecatlantis. The main function is to distribute the weight evenly throughout the area of the aquarium surface. It also absorbs any irregularity that is present at the surface of contact between the aquarium background and the top of the cabinet, as well as helping to isolate the aquarium, thermally.

The utilization of other material none recommended can cause the break of the tank voiding the warranty.


No. Once installed, the aquarium can’t be moved or shifted to another place, since such an operation would damage its stability and security. To replace the aquarium, you must empty it in full (including decoration).

No. Aquatlantis only works with distributors. Find the nearest store through our store map.

You can order spare parts through Aquatlantis representatives. Find the nearest store through our store map.

In each product page, it is provided a documentation area with all the files relative to the product in question, as instruction guides and product files. Download all the files you need.

The warranty is valid for a period of two years from the date of purchase. Although you must take care of the exclusions mentioned in the warranty provided with your aquarium. To claim the warranty, it is necessary to provide the aquarium ID and the proof of purchase.

The ID of your aquarium is a set of letters and numbers that identifies unequivocally your product and all its traceability. The ID is composed of a letter and two sets of six digits.

The Biobox filters are provided with an instruction guide that includes important information.

Before filling the aquarium, place the filter in the right place. Don’t forget to remove the protective films of the filter recharges (EasyBox Activated Carbon and EasyBox Aquaclay). Verify the positioning of the pump and the heater (if included) and place in the filter output the guiding flow piece. Fill the aquarium. Switch on the equipment and confirm the well-functioning of the filter. Place the filter cover.


Before proceeding to the filter maintenance, always unplug all the electrical devices.

The Biobox filters are provided with an instruction guide that will help you on your filter’s maintenance. Remember that its good maintenance allows its good working. On the user guide it is informed the utilization periods of the filter media which maintain your filter in good condition. Also verify the water level that is between the defined levels in the filter.


All the filter recharges have the goal to maintain the aquarium clean and in excellent conditions. However, the misuse and the replacement of recharges can prejudice the good functioning of the aquarium. To avoid that, you must respect the rules of replacement which varies according to the EasyBox recharge. In each package you will find the information for the replacement time that varies between 1 week and 8 months. To avoid water disequilibrium, do not replace recharges with similar function at the same time.

During the operation of the filter, the filtered particles get accumulated in the filter media causing a reduction of the water flow. Check the EasyBox recharges and, if necessary, replace them in time respecting the replacement rules that vary depending on the type of the EasyBox recharge. You should also check the water inlet and outlet in the filter and pump so that they are not obstructed.

Yes. All the EasyFlux pumps have flow regulator. For more information consult the documentation available on our website.

The choice of the EASY LED UNIVERSAL depends on the aquarium type. If you access the “Products” area you can consult the product files of the EASY LED UNIVERSAL and obtain all the information you need, as the LED typology, lumens, consumptions, etc.

The EASY LED controllers are devices that allow you to control the operation of the LED lamps, scheduling the time to switch on (gradual increase of light intensity) and switch off (gradual decrease of the light intensity). To ensure its full operation, you should carefully follow ALL the steps of the instructions included in the product package. After the correct programming, the controller should work properly. 

The EASY LED controllers are devices that allow you to control the operation of the LED lamps, scheduling the time to switch on (gradual increase of light intensity) and switch off (gradual decrease of the light intensity). To ensure its full operation, you should carefully follow ALL the steps of the instructions included in the product package. After the correct programming, the controller should work properly. 

The EASY LED Control 1 has 1 channel (1 outlet). The channel has two available schedules.

Utilization: Max. 12V/24V till 5A (inlet and outlet/channel)

The EASY LED Control 2plus has two independent channels (2 outlets). Each channel has two available schedules.

Utilization: Max. 12V/24V-5A (inlet) / Max. 12V/24V-2.5A (per outlet/channel)

Both controllers have the adjustable light intensity function (from 0 to 100%).


The EASY LED Control 1 has 1 channel (1 outlet). The channel has two available schedules.

Utilization: Max. 12V/24V till 5A (inlet and outlet/channel)

The EASY LED Control 2plus has two independent channels (2 outlets). Each channel has two available schedules.

Utilization: Max. 12V/24V-5A (inlet) / Max. 12V/24V-2.5A (per outlet/channel)

Both controllers have the adjustable light intensity function (from 0 to 100%).


For example, if you only want to turn the lamp on at 12am and turn off at 4pm, set ON 1 at 12am and OFF 1 at 4pm. On the second program, set ON 2 at 0:00 and OFF 2 also at 0:00. Thus, the light unit will turn on and off only once a day, at the scheduled time.

For example, if you only want to turn the lamp on at 12am and turn off at 4pm, set ON 1 at 12am and OFF 1 at 4pm. On the second program, set ON 2 at 0:00 and OFF 2 also at 0:00. Thus, the light unit will turn on and off only once a day, at the scheduled time.

The controller turns the light on and off very gradually at the scheduled time. If, after programming, the light unit turn on and off like a “lightning”, wait till it turns on progressively. Do not do anything. Do not turn the controller off, or the lamp.

If it does not bind at all, take the product to the store.


The controller turns the light on and off very gradually at the scheduled time. If, after programming, the light unit turn on and off like a “lightning”, wait till it turns on progressively. Do not do anything. Do not turn the controller off, or the lamp.

If it does not bind at all, take the product to the store.


In case of power failure, the controller EASY LED keeps the configurations. After switched on again, the lamp returns to light up gradually, reaching its maximum intensity after an hour. 

In case of power failure, the controller EASY LED keeps the configurations. After switched on again, the lamp returns to light up gradually, reaching its maximum intensity after an hour. 

Read carefully the instructions provided with your aquarium before the installation (manual and warnings) in order to perform every step correctly. Please certify that your aquarium is in good condition and without any damage.

If your aquarium has a Biobox filter, follow its instruction, and don’t forget to remove the protective films of the filter media (EasyBox Activated Carbon and EasyBox Aquaclay).

Place the aquarium on the cabinet/support and verify if it is stable and leveled. Fill it with water in order to ensure its tightness. After this verification, empty it and start the decoration. When filling the tank with water, we recommend you the utilization of a container to avoid affecting the decoration. Switch on the equipment of your tank (heater, pumps, lighting system, etc.) and let it stabilize. Get advised in the store you bought the fish and plants what are the recommended conditions for the species you choose. For more information see the documentation available on our website.


We recommend you the utilization of a Carpet Shock from Tecatlantis. The main function is to distribute the weight evenly throughout the area of the aquarium surface. It also absorbs any irregularity that is present at the surface of contact between the aquarium background and the top of the cabinet, as well as helping to isolate the aquarium, thermally.

The utilization of other material none recommended can cause the break of the tank voiding the warranty.


No. Once installed, the aquarium can’t be moved or shifted to another place, since such an operation would damage its stability and security. To replace the aquarium, you must empty it in full (including decoration).

No. Aquatlantis only works with distributors. Find the nearest store through our store map.

You can order spare parts through Aquatlantis representatives. Find the nearest store through our store map.

In each product page, it is provided a documentation area with all the files relative to the product in question, as instruction guides and product files. Download all the files you need.

The warranty is valid for a period of two years from the date of purchase. Although you must take care of the exclusions mentioned in the warranty provided with your aquarium. To claim the warranty, it is necessary to provide the aquarium ID and the proof of purchase.

The ID of your aquarium is a set of letters and numbers that identifies unequivocally your product and all its traceability. The ID is composed of a letter and two sets of six digits.

The Biobox filters are provided with an instruction guide that includes important information.

Before filling the aquarium, place the filter in the right place. Don’t forget to remove the protective films of the filter recharges (EasyBox Activated Carbon and EasyBox Aquaclay). Verify the positioning of the pump and the heater (if included) and place in the filter output the guiding flow piece. Fill the aquarium. Switch on the equipment and confirm the well-functioning of the filter. Place the filter cover.


Before proceeding to the filter maintenance, always unplug all the electrical devices.

The Biobox filters are provided with an instruction guide that will help you on your filter’s maintenance. Remember that its good maintenance allows its good working. On the user guide it is informed the utilization periods of the filter media which maintain your filter in good condition. Also verify the water level that is between the defined levels in the filter.


All the filter recharges have the goal to maintain the aquarium clean and in excellent conditions. However, the misuse and the replacement of recharges can prejudice the good functioning of the aquarium. To avoid that, you must respect the rules of replacement which varies according to the EasyBox recharge. In each package you will find the information for the replacement time that varies between 1 week and 8 months. To avoid water disequilibrium, do not replace recharges with similar function at the same time.

During the operation of the filter, the filtered particles get accumulated in the filter media causing a reduction of the water flow. Check the EasyBox recharges and, if necessary, replace them in time respecting the replacement rules that vary depending on the type of the EasyBox recharge. You should also check the water inlet and outlet in the filter and pump so that they are not obstructed.

Yes. All the EasyFlux pumps have flow regulator. For more information consult the documentation available on our website.

The choice of the EASY LED UNIVERSAL depends on the aquarium type. If you access the “Products” area you can consult the product files of the EASY LED UNIVERSAL and obtain all the information you need, as the LED typology, lumens, consumptions, etc.

The EASY LED controllers are devices that allow you to control the operation of the LED lamps, scheduling the time to switch on (gradual increase of light intensity) and switch off (gradual decrease of the light intensity). To ensure its full operation, you should carefully follow ALL the steps of the instructions included in the product package. After the correct programming, the controller should work properly. 

The EASY LED controllers are devices that allow you to control the operation of the LED lamps, scheduling the time to switch on (gradual increase of light intensity) and switch off (gradual decrease of the light intensity). To ensure its full operation, you should carefully follow ALL the steps of the instructions included in the product package. After the correct programming, the controller should work properly. 

The EASY LED Control 1 has 1 channel (1 outlet). The channel has two available schedules.

Utilization: Max. 12V/24V till 5A (inlet and outlet/channel)

The EASY LED Control 2plus has two independent channels (2 outlets). Each channel has two available schedules.

Utilization: Max. 12V/24V-5A (inlet) / Max. 12V/24V-2.5A (per outlet/channel)

Both controllers have the adjustable light intensity function (from 0 to 100%).


The EASY LED Control 1 has 1 channel (1 outlet). The channel has two available schedules.

Utilization: Max. 12V/24V till 5A (inlet and outlet/channel)

The EASY LED Control 2plus has two independent channels (2 outlets). Each channel has two available schedules.

Utilization: Max. 12V/24V-5A (inlet) / Max. 12V/24V-2.5A (per outlet/channel)

Both controllers have the adjustable light intensity function (from 0 to 100%).


For example, if you only want to turn the lamp on at 12am and turn off at 4pm, set ON 1 at 12am and OFF 1 at 4pm. On the second program, set ON 2 at 0:00 and OFF 2 also at 0:00. Thus, the light unit will turn on and off only once a day, at the scheduled time.

For example, if you only want to turn the lamp on at 12am and turn off at 4pm, set ON 1 at 12am and OFF 1 at 4pm. On the second program, set ON 2 at 0:00 and OFF 2 also at 0:00. Thus, the light unit will turn on and off only once a day, at the scheduled time.

The controller turns the light on and off very gradually at the scheduled time. If, after programming, the light unit turn on and off like a “lightning”, wait till it turns on progressively. Do not do anything. Do not turn the controller off, or the lamp.

If it does not bind at all, take the product to the store.


The controller turns the light on and off very gradually at the scheduled time. If, after programming, the light unit turn on and off like a “lightning”, wait till it turns on progressively. Do not do anything. Do not turn the controller off, or the lamp.

If it does not bind at all, take the product to the store.


In case of power failure, the controller EASY LED keeps the configurations. After switched on again, the lamp returns to light up gradually, reaching its maximum intensity after an hour. 

In case of power failure, the controller EASY LED keeps the configurations. After switched on again, the lamp returns to light up gradually, reaching its maximum intensity after an hour. 

Read carefully the instructions provided with your aquarium before the installation (manual and warnings) in order to perform every step correctly. Please certify that your aquarium is in good condition and without any damage.

If your aquarium has a Biobox filter, follow its instruction, and don’t forget to remove the protective films of the filter media (EasyBox Activated Carbon and EasyBox Aquaclay).

Place the aquarium on the cabinet/support and verify if it is stable and leveled. Fill it with water in order to ensure its tightness. After this verification, empty it and start the decoration. When filling the tank with water, we recommend you the utilization of a container to avoid affecting the decoration. Switch on the equipment of your tank (heater, pumps, lighting system, etc.) and let it stabilize. Get advised in the store you bought the fish and plants what are the recommended conditions for the species you choose. For more information see the documentation available on our website.


We recommend you the utilization of a Carpet Shock from Tecatlantis. The main function is to distribute the weight evenly throughout the area of the aquarium surface. It also absorbs any irregularity that is present at the surface of contact between the aquarium background and the top of the cabinet, as well as helping to isolate the aquarium, thermally.

The utilization of other material none recommended can cause the break of the tank voiding the warranty.


No. Once installed, the aquarium can’t be moved or shifted to another place, since such an operation would damage its stability and security. To replace the aquarium, you must empty it in full (including decoration).

No. Aquatlantis only works with distributors. Find the nearest store through our store map.

You can order spare parts through Aquatlantis representatives. Find the nearest store through our store map.

In each product page, it is provided a documentation area with all the files relative to the product in question, as instruction guides and product files. Download all the files you need.

The warranty is valid for a period of two years from the date of purchase. Although you must take care of the exclusions mentioned in the warranty provided with your aquarium. To claim the warranty, it is necessary to provide the aquarium ID and the proof of purchase.

The ID of your aquarium is a set of letters and numbers that identifies unequivocally your product and all its traceability. The ID is composed of a letter and two sets of six digits.

The Biobox filters are provided with an instruction guide that includes important information.

Before filling the aquarium, place the filter in the right place. Don’t forget to remove the protective films of the filter recharges (EasyBox Activated Carbon and EasyBox Aquaclay). Verify the positioning of the pump and the heater (if included) and place in the filter output the guiding flow piece. Fill the aquarium. Switch on the equipment and confirm the well-functioning of the filter. Place the filter cover.


Before proceeding to the filter maintenance, always unplug all the electrical devices.

The Biobox filters are provided with an instruction guide that will help you on your filter’s maintenance. Remember that its good maintenance allows its good working. On the user guide it is informed the utilization periods of the filter media which maintain your filter in good condition. Also verify the water level that is between the defined levels in the filter.


All the filter recharges have the goal to maintain the aquarium clean and in excellent conditions. However, the misuse and the replacement of recharges can prejudice the good functioning of the aquarium. To avoid that, you must respect the rules of replacement which varies according to the EasyBox recharge. In each package you will find the information for the replacement time that varies between 1 week and 8 months. To avoid water disequilibrium, do not replace recharges with similar function at the same time.

During the operation of the filter, the filtered particles get accumulated in the filter media causing a reduction of the water flow. Check the EasyBox recharges and, if necessary, replace them in time respecting the replacement rules that vary depending on the type of the EasyBox recharge. You should also check the water inlet and outlet in the filter and pump so that they are not obstructed.

Yes. All the EasyFlux pumps have flow regulator. For more information consult the documentation available on our website.

The choice of the EASY LED UNIVERSAL depends on the aquarium type. If you access the “Products” area you can consult the product files of the EASY LED UNIVERSAL and obtain all the information you need, as the LED typology, lumens, consumptions, etc.

The EASY LED controllers are devices that allow you to control the operation of the LED lamps, scheduling the time to switch on (gradual increase of light intensity) and switch off (gradual decrease of the light intensity). To ensure its full operation, you should carefully follow ALL the steps of the instructions included in the product package. After the correct programming, the controller should work properly. 

The EASY LED controllers are devices that allow you to control the operation of the LED lamps, scheduling the time to switch on (gradual increase of light intensity) and switch off (gradual decrease of the light intensity). To ensure its full operation, you should carefully follow ALL the steps of the instructions included in the product package. After the correct programming, the controller should work properly. 

The EASY LED Control 1 has 1 channel (1 outlet). The channel has two available schedules.

Utilization: Max. 12V/24V till 5A (inlet and outlet/channel)

The EASY LED Control 2plus has two independent channels (2 outlets). Each channel has two available schedules.

Utilization: Max. 12V/24V-5A (inlet) / Max. 12V/24V-2.5A (per outlet/channel)

Both controllers have the adjustable light intensity function (from 0 to 100%).


The EASY LED Control 1 has 1 channel (1 outlet). The channel has two available schedules.

Utilization: Max. 12V/24V till 5A (inlet and outlet/channel)

The EASY LED Control 2plus has two independent channels (2 outlets). Each channel has two available schedules.

Utilization: Max. 12V/24V-5A (inlet) / Max. 12V/24V-2.5A (per outlet/channel)

Both controllers have the adjustable light intensity function (from 0 to 100%).


For example, if you only want to turn the lamp on at 12am and turn off at 4pm, set ON 1 at 12am and OFF 1 at 4pm. On the second program, set ON 2 at 0:00 and OFF 2 also at 0:00. Thus, the light unit will turn on and off only once a day, at the scheduled time.

For example, if you only want to turn the lamp on at 12am and turn off at 4pm, set ON 1 at 12am and OFF 1 at 4pm. On the second program, set ON 2 at 0:00 and OFF 2 also at 0:00. Thus, the light unit will turn on and off only once a day, at the scheduled time.

The controller turns the light on and off very gradually at the scheduled time. If, after programming, the light unit turn on and off like a “lightning”, wait till it turns on progressively. Do not do anything. Do not turn the controller off, or the lamp.

If it does not bind at all, take the product to the store.


The controller turns the light on and off very gradually at the scheduled time. If, after programming, the light unit turn on and off like a “lightning”, wait till it turns on progressively. Do not do anything. Do not turn the controller off, or the lamp.

If it does not bind at all, take the product to the store.


In case of power failure, the controller EASY LED keeps the configurations. After switched on again, the lamp returns to light up gradually, reaching its maximum intensity after an hour. 

In case of power failure, the controller EASY LED keeps the configurations. After switched on again, the lamp returns to light up gradually, reaching its maximum intensity after an hour. 

Form Success
Thank you

Esteja atento à sua caixa de email.

Back to the top